12V 6A Battery Charger and Maintainer Lithium Pro Series
12V 6A Battery Charger and Maintainer Lithium Pro Series

12V 6A Battery Charger and Maintainer Lithium Pro Series

  • OC-PRO600L

The PRO600L battery charger is perfect all round battery charger for charging batteries found in passenger vehicles, jet skis, motorcycles and garden equipment. The PRO600L can also be used to maintain batteries up to 180Ah making it ideal for maintaining vehicles that spend extended amounts of time without being driven including classic cars, motorcycles and boats.. 

  • 9-Stage Battery Charging.
  • Boost battery performance and increase the life of your batteries.
  • Selectable Battery Types.
  • Selectable Charge Rate.
  • Charges 12V batteries from 3Ah-120Ah
  • Maintenance (trickle) charging up to 180Ah for longer life batteries
  • Patented desulphation and battery reconditioning and rejuvenation function
  • 5 year warranty
  • Life time support

    The PRO600L Battery Charger and Maintainer (Trickle Charger) is designed to charge AGM, Calcium SMF, EFB, GEL, WET & Lithium (LiFePO4) batteries. from 3Ah to 120Ah. The charger can also be used to maintain batteries up to 120Ah. The PRO600L battery charger and maintainer utilises state of the art patented 9 stage technology for charging various types of 12V batteries. The PRO600L can also be used to maintain a wide range of batteries and features a patented repair and rejuvenation mode for lead-acid type batteries which breaks down heavily desulphated cells revitalising the battery increasing battery life and performance. 

    1A Maintenance mode will charge smaller batteries between 3Ah and 20Ah and will maintain batteries up to 100Ah.

    4A Silent charge mode will charge mid-sized batteries between 12Ah and 80Ah and will maintain batteries up to 120Ah.

    6A Rapid charge mode will charge batteries between 18Ah and 120Ah and will maintain batteries up to 180Ah. This setting will give you the fastest charge possible.

    OzCharge Pro600L Lithium 6AA Battery Charger and maintainer


    Features OC-PRO600L 12V 12Volt Battery Charger Output Leads

    Battery Charging vs. Battery Maintenance

    What's the difference between the two and which battery charger suit your requirements best? Firstly you need to determine whether you need to recharge a flat battery entirely or just keep a battery at full charge.

    Battery charging is when you are requiring to recharge a flat or dead battery to full. Battery maintenance on the other hand is when you just want to keep a battery topped up. For instance, if you're storing a classic car that you only drive a few times a month but want to ensure it's ready to go on a sunny afternoon you would require battery maintenance as opposed to battery charging. This is often referred to as trickle charging a battery. All OzCharge battery chargers perform both functions, and understanding each charger's limits is important. 



    Input: 100-240VAC 50/60Hz
    Power Consumption (max): 1.4 / 0.75A (95W)
    Output: 12V DC - 6A / 4A / 1A
    Charge Voltage: 14.1 / 14.4V / 14.7V DC
    Float Trickle Voltage: 13.6V DC (Lead-Acid battery Selection only)
    Start Voltage: 2V DC
    Suitable for:


    Calcium SMF

    AGM&WET (Inc EFB)

    Lithium (LifePO4)

    Ideal for Charging:
    3Ah - 120Ah (900CC)
    Ideal for Maintaining: 3Ah - 180Ah (1300CCA)
    Input Cord Length: 1.8m with 2 PIN AU AC Wall Plug
    Output Cord Length: 1.2m with SAE 2 Pin Connector
    Charging Lead Length: 60cm - Integrated Crocodile Clip / Ring Terminal Harness
    Dimensions: 182mm x 88mm x 48mm
    Weight: 0.75kg
    Operating Temperature: -15 to 50° C
    Storage Temperature: -25 to 85° C
    What's Included?: 1 x PRO600L Charger
    1 x Crocodile Clip w/integrated Ring Terminals Harness
    1 x Owner's Manual


    Available at:

    RJ Batteries Stockists of OzCharge Battery Chargers & Jump StartersBattery World Stockists of OzCharge Battery Chargers & Jump Starters


    Search our site

    Shopping Cart

    Your cart is currently empty.